Product details

Exterior high elastic putty

[Use]

      Suitable for cement mortar plastering surfaces, concrete, wall paint finishes and various types of insulation systems for buildings uneven subsidence caused by seasonal changes or structural cracks, and elastic latex (Fluorocarbon, lacquer) supporting the use of better.

[Features]

     1 elasticity, elongation, not only can solve common cracks, and can effectively alleviate the structural cracks in buildings or cause uneven subsidence seasonal variations, making it difficult to crack the coating surface.

     2 excellent bonding performance, good parents together, not only with the primary bond firm, but also to ensure easy paint adhesion and bonding.  

    3 good water resistance and impermeability, not only in water or water vapor through the coating can protect vulnerable to wet and dry cycles generated base surface, and is suitable for wet environments.

     4 has excellent resistance to aging and good corrosion resistance.

[Instructions]

     After stirring square 0.3-0.5 weight ratio again, the first water into the barrel, and then add the powder, then stir into a uniform paste with an electric mixer and let stand for 10-15 minutes: 1 Press powder: water = 1 be used.

     2 primary treatment before scraping shall grant a clean, remove surface oil, loose material, floating ash.

     3 Construction of the temperature of 5 degrees or more, when the temperature is above 30 degrees, on the wall cooling treatment to avoid wiping the surface rough.     

     4. is dry 2 hours at room temperature, about 36 hours of hard work.

     5 This product is fastened after sealing, does not affect the next use.

     6 Store in a cool dry place.  

    7 shelf life of six months.

[Executive standard]: JG / T157-2009

[Standard]: GB18581-2009

[Weight]: 20kg / bag

[Theoretical amount]: 0.5-0.7 kg / square